The BS30ZR flow monitor accepts low-level frequency input signals typically found in turbine flow sensors. The output signal for these types of sensors is a frequency proportional to the rate of flow. The BS30ZR monitor uses the frequency information to calculate flow rate and total flow. Using the programming buttons, you can select unit rates, total units, and unit time intervals among other functions. If required, the flow monitor can also be reconfigured in the field. The BS30ZR is an advanced flow monitor with a NEMA 4X explosion proof aluminum casing, with standard 4-20mA, Pulse, and Modbus RS485 outputs. It’s perfect for operation in remote locations as it can run on battery power or on a loop. The monitor provides advanced communication capabilities over an RS485 bus using Modbus RTU and control outputs. For further information on the BS30ZR Flow Monitor, please contact one of our in-house experts.